High efficiency condenser
with compressor for multi-effect solar desalination—Savengy Technologies. LLC,
2736 Tally Ho Ave, Orlando, FL 328263691
wei
wu, Principal Investigator, wuwei98@gmail.com
wei
wu, Business Official, wuwei98@gmail.com
Amount:
$150000
In
the proposed Phase I program, Savengy Technologies, LLC and the University of
Central Florida (UCF) will develop physics-based models and build a prototype with
the goal of producing a reliable tool to design a commercially viable, energy
efficient, low cost thermal desalination unit. This unit is especially suitable
for people living in remote areas so that they can be self-sufficient and
secure. Savengy Technologies, LLC proposes a novel solar powered cycle for co-production
of electricity and potable water. The latter is based on multi-effect
desalination (MED) with a compact condenser and a small vapor compressor. The
vapor compressor is novel and is capable of minimizing the loss of latent heat
which is critical to energy efficiency. MED can recover potable water from
treated waste water, brackish water and sea water. This process has many
advantages compared to other desalination processes such as reverse osmosis where
many pre-treatment requirements are needed.
Commercial Applications and
Other Benefits
Savengy
already has a preliminary design for the full-scale unit and will finalize the
design during the Phase I efforts. Savengy will also conduct experiment to
realize small-scale water production and to show that the approach is scalable
to the Phase II prototype. The proposed system can achieve acceptable cost
(~$1/m3), as well as low energy requirements (<2 kWh/m3). The MED unit is
transportable and compact. There is no fouling issue because the temperature of
MED is less than 85oC. The proposed technology and systems are able to produce
fresh water (<500 ppm total dissolved solids) from seawater (35,000 ppm
total dissolved solids). In Phase II and beyond, Savengy will collaborate with their
partners to design and build a thermal desalination system with a 1000 m3/day
production rate of potable water, and pursue further investigations into
scaling issues for a higher target.